баннер
RU|EN
баннер
пластомер

Melt index tester

MELT INDEX TESTER IS A DEVICE FOR MEASURING THE MELT FLOW INDEX (MFI)

  • For measuring the melt flow index

  • The easiest to use model

  • Effectively used to measure MFI of secondary pellets


ПЛАСТОМЕТР ДЁШЕВО

HIGH SPEED AND ACCURACY OF MEASUREMENTS

1

High speed measurement
Up to 15 tests per hour

2

Automatic melt bar cutting
Accuracy – 0.1 sec.

3

Dual temperature control system
Dual heating coil, independent temperature control of upper and lower sections.

The melt index tester is a device for measuring the melt flow index of molten plastic. The device is used in plastic waste and films recycling plants.

HOW IT WORKS

Thermoplastic materials under pressure and high temperatures are melted. In molten form, thermoplastic materials can then be turned into high quality products. An important property in the recycling process is the characteristic of the molten plastic. The flow rate through the capillary depends on the molecular weight and its distribution. Measurement of flow indices or polymer fluidity level is a quality control method. These parameters characterize plastic.

The range of measuring devices offers a choice of optional features. The device is able to cope with simple standard tests or full-fledged research tasks. Basic models determine melt flow indices. You can obtain this reliable device with a number of functions by adding:

  • a knife for cutting pellets in automatic mode;
  • position sensor;
  • cargo lifts;
  • corrosion resistant chamber.

To perform complex tests, melt index testers with a safe load selector are suitable. Advantages:

  • high accuracy of constant temperature conditions;
  • the use of different test methods – manual, automatic;
  • rapid temperature increase;
  • calibration, adjustment of test parameters.

TECHNICAL SPECIFICATIONS

Melt index tester parameters:


Channel diameter2.095±0.005
Maximum temperature440 C
Measuring range0.1~100)g/10min,
0.01~350)cm3/10min
Installed power, kW500
Automatic melt bar cutting, accuracy:0.1 с
Complete set of accessories
Easy-to-use keypad
Built-in mini printer for printing test data
ПЛАСТОМЕР 1 ПЛАСТОМЕР 2 ПЛАСТОМЕР 3 ПЛАСТОМЕР 4 ПЛАСТОМЕР 5

SEND US YOUR INQUIRY